Customer Service 1-888-707-1880
or email customerservice@dyaco.ca Dyaco Canada Inc. ©2014
8
STEP 2 ATTACH THE SEAT POST, SEAT AND PEDAL
1.
The right pedal (28) has R stamped on the end of the pedal shaft. The right pedal (28)
has right hand threads and is tightened by turning clockwise. The left pedal (27) has L
stamped on the end of the pedal shaft. The left pedal (27) has left hand threads and is
tightened by turning counter clockwise Thread the right pedal (28) into the right side of
the crank (7) as shown. Tighten the pedal securely.
2.
Do the same to attach the left pedal (27) to the left side of the crank (7).
3.
Attach the seat (29) to the seat post (4) with nylock nuts (M8x1.25)(51) and washers
(M8)(54). Insert the seat post (4) into the main frame (1) and secure with the
adjustment knob (31).
NOTE:
The adjustment knob (31) should be screwed in tight to ensure that the seat
post (4) fits securely into the main frame (1).
4
54
51
54
51
29
28
27
31
1
7