Customer Service 1-888-707-1880 10 Maurice Pincoffs Canada Inc.
©
2010
STEP 9
1. Insert the hand pulse wire
(21)
from the
stationary handlebar (
3)
through the hole of upright
(2)
.
Note
: Bind the hand pulse wire
(21)
with the cable
(73).
Thread the hand pulse wire through the
opening and up though the computer bracket of the upright
(2).
Please discard the cable
(73).
2. Attach the welded curved bracket of stationary handlebar
(3)
to the upright
(2).
Secure with three
curve washers
(20),
three spring washers
(19)
and three allen head bolts
(18)
.
STEP 10
1. Connect the extension sensor wire
(36)
to the wire from the back of the computer
(11)
.
2. Connect the hand pulse wire
(21)
to the wire from the back of the computer
(11).
3. Attach the computer
(11)
to the computer bracket of the upright
(2).
Secure with four screws
(12)
which are pre-assemble on the back of the computer.
Note:
Ensure that the wires are away from
the bracket when sliding on the computer.
PDF created with pdfFactory trial version
www.softwarelabs.com
