Customer Service 1-888-707-1880 8 Maurice Pincoffs Canada Inc.
©
2010
STEP 5
1. Slide one curve sleeve
(25)
and one flat washer
(24)
on to the left side of the axle of the upright
(2)
.
2. Attach left upper handlebar assembly
(4L) on
to the left side of the axle of the upright
(2)
. Secure
with one flat washer
(22)
, one spring washer
(19)
and one allen head bolt
(18).
3. Repeat for the right side.
STEP 6
1. Attach the left crank arm
(8L)
of the left foot pedal tube
(6L)
to the left axle of the pulley
(7).
Secure
with one anti- slippery washer
(54)
, one left flange nut
(38)
and one crank cover
(52). NOTE:
Ensure that the nut is securely tightened.
2. Repeat for the right crank arm
(8R).
NOTE:
The thread on the right side of the pivot shaft
(7)
is right thread. Please use enclosed tools
(76/78) to tighten it with clockwise. The thread on the left side of the pivot shaft
(7)
is left thread.
Please use attach enclosed tools (16/78) to tighten it with counter-clockwise.
PDF created with pdfFactory trial version
www.softwarelabs.com