Customer Service 1-888-707-1880
Or
customerservice@pincoffs.ca
13 Maurice Pincoffs Canada Inc.©2013
FOLDING INSTRUCTIONS
To fold the rower
Remove the locking pin (35) from the u-bracket found on the main frame (1). Lift the slide rail (8) and
insert the locking pin (35) into the u-bracket (84). Unit is now locked into folding position.
To un-fold the rower
Hold the slide rail (8) and pull out the locking pin (35) from the u-bracket (84) and lower the slide raile (8).
Insert the locking pin (35) into the u-bracket (84) to secure your rower in the horizontal position.
MAINTENANCE
The safety and integrity designed into the Advantage Fitness rower can only be maintained
when the Advantage Fitness rower is regularly examined for damage and wear. Special
attention should be given to the following:
1. Adjust the TENSION KNOB(28) and verify that the Magnetic Brake System provides tension.
The Magnetic Brake System should provide many years of use.
2. Clean the roller tracks in the RAIL with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and
bolts. Tighten loose nuts and bolts.
4. Verify that the CAUTION LABEL is in place and easy to read.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the Advantage Fitness rower
removed from service until repair is made.
7. Only Maurice Pincoffs Canada supplied components shall be used to maintain/repair the
Advantage Fitness rower.
8. Keep your Advantage Fitness rower clean by wiping it off with an absorbent cloth after use.
1
84
35
8
