Evo Wiring
[POWER/SERIAL CABLE DIAGRAM]
We’ve included a detachable wiring harness. Connect everything before
plugging harness into the Evo device.
Black Wire:
Ground – Connect the ground wire to the vehicle chassis.
Red Wire:
12 VDC Constant Power – Connect to a constant power source. Voltage should
read 12V when the vehicle’s ignition line is in the off position.
White Wire:
Ignition input (optional unless
payment reminder is used)
Green Wire:
Programming Input (not used)
Yellow Wire:
Output (Connects to
starter interruptor relay)
Once the wires are attached and Evo is mounted, plug the harness into it
and power up.
The LED indicators will show:
•
A solid green light indicates a good cellular coverage.
Note:
If the light does not lock on and go solid, you’re not getting a good signal.
Unit will not track properly.
•
A solid red light indicates good GPS signal.
GREEN BLACK YELLOW
RED
Input Ground Output +12V Battery
1-800-553-7031
l
AdvantageGPS.com
l
3
