background image

  

 

QUICK START GUIDE 

 
 

Kinesis

® 

Advantage2

 

Keyboard with SmartSet Technology 

 

Models: KB600, KB600QD, KB600LF, KB605  

The Advantage2™ Contoured™ Keyboard has a unique ergonomic design for maximum comfort and productivity. Kinesis proprietary 
SmartSet™ technology provides many powerful electronic features that further boost productivity. It provides simple but powerful onboard 
programming, plus direct editing, sharing & backup of config files, all 
without any special drivers. The keyboard is plug-and-play with all 
operating systems that support full-featured USB keyboards.* 
 
This Quick Start Guide covers the installation and basic setup of the 
Advantage2. For detailed instructions on customizing your Advantage2, 
Advanced Features, and Warranty Information please download the 
Advantage2 User’s Manual at:  

kinesis.com/advantage2-resources.  

 

Installation 

1. Plug Advantage2 into your computer’s USB port. A device installation notice will appear on your screen.

 

2. When the auto-installation is completed, you should see a “device is ready to use” notice on your screen. 
3. For maximum comfort, install the replaceable adhesive palm pads onto the keyboard’s integrated palm rests.  
4. OPTIONAL: If you are connecting an Advantage2 foot pedal to the keyboard, plug it into the telephone-style connector at the back of the 
keyboard using the coupler provided with the pedals (FS007RJ11, FS007TAF). 

 

Important Note 

SmartSet Technology provides powerful tools for customizing the keyboard’s layout for those looking to maximize productivity. However, 
because of the risk of inadvertent reprogramming, Kinesis recommends that ALL USERS read this Quick Start Guide before using the keyboard. 
Even users familiar with the original Advantage keyboard are advised to read this guide since some programming commands have changed and 
new ones have been added. 

 

Warning  

The Advantage2 keyboard is not a medical treatment. Please consult the Advantage2 User’s Manual for Safety & Health Tips (see link above).  

 

*

Certain KVM and specialized telephony devices will not support the Advantage2 keyboard. Check the tech support page listed above at Kinesis.com or 

contact Kinesis Tech Support if you have compatibility problems. 

© 2016 by Kinesis Corporation, all rights reserved. Printed in the USA on recycled paper.  

KINESIS is a registered trademark of Kinesis Corporation.  ADVANTAGE2, CONTOURED KEYBOARD, 
SMARTSET and V-DRIVE are trademarks of Kinesis Corporation. WINDOWS, MAC, and ANDROID are 
registered trademarks of Microsoft Corporation, Apple, Inc., and Google, Inc., respectively. 

KINESIS CORPORATION  

22030 20th  Avenue SE, Suite 102  

Bothell, Washington 98021 USA 

sales@kinesis.com, www.kinesis.com 

KB600 

Summary of Contents for KB600

Page 1: ...the keyboard plug it into the telephone style connector at the back of the keyboard using the coupler provided with the pedals FS007RJ11 FS007TAF Important Note SmartSet Technology provides powerful tools for customizing the keyboard s layout for those looking to maximize productivity However because of the risk of inadvertent reprogramming Kinesis recommends that ALL USERS read this Quick Start G...

Page 2: ...ws Mac or PC Users may also configure the modifier keys in the thumb operated clusters in one of three modes These modes are optimized for Windows users Mac users and PC users who don t need a Windows key Thumb Key Mode is set independently from layout QWERTY or Dvorak Thumb Key Mode defaults to the Windows configuration in the US PC mode is pre set for non US models to allow the right Alt to serv...

Page 3: ...e layout Note Soft Reset DOES NOT change the Layout or Thumb Key Mode A Hard Reset restores all defaults and reverts to the QWERTY layout To perform a hard reset hold ctrl F9 while plugging in keyboard keep holding keys for several seconds until LEDs stop flashing Tap ctrl key afterwards if you experience odd key actions after a hard reset due to a stuck Ctrl key action dsable macro Progm F10 Disa...

Page 4: ... on the keyboard without moving your hands from a stationary position on the palm rests For maximum comfort install the self adhesive palm pads Replacement pads are available for purchase LED Indicator Lights The blue LEDs located near the center of the keyboard are used to indicate that status of the keyboard The lights will illuminate when one of the four basic modes are active See image at righ...

Reviews: