Page 16 / 56
DLT-V6210 Manual V1.00
Advantech-DLoG
WARNING
Risk of accident on the targeted objects due to unstable attachment of DLT-V6210.
When installing DLT-V6210, make sure that no one will be injured if the
bracket breaks (e.g. because of a stress fracture).
Alternatively you can put appropriate safety measures in place (e.g. install a
security cable in addition to the mounting bracket).
5.1.3.
Handling the device
WARNING
Hazardous voltage, electrical shock from contacting with live parts.
Do not put DLT-V6210 into operation if it is visibly damaged.
Do not open or modify DLT-V6210.
WARNING
Risk of injury due to weight and sharp-edged parts.
DLT-V6210 can fall down and cause injuries due to its weight.
The strain relief rail can have sharp edges and cause cutting injuries.
Always hold DLT-V6210 by the housing with both hands.
Never use the antenna cap as a handle. It can break due to the weight
involved.
Do not hold DLT-V6210 by the strain relief rail.
Use the assistance of a second person for installation work.
NOTICE: Physical damage
Damage and scratching of the touchscreen without transportation protective film.
The front display of DLT-V6210 is protected during transportation by a transparent film. This film
should remain on the front display during assembly to avoid damage to the front display surface.
Only remove the film after all of the installation work has been completed.