PPC-6151C_6171C_6191C Startup Manual 3
Panel Mounting
Environment
Operating Temperature 0 ~ 50 °C (32 ~ 122 °F)
Storage Temperature
-30 ~ 60 °C (-22 ~ 140 °F)
Relative Humidity
10 ~ 95% @ 40 °C (non-condensing)
Shock
Operating 10 G peak acceleration (11 ms duration), follows IEC 60068-
2-27
Vibration
Operating random vibration test 5 ~ 500Hz, 1Grms @with HDD, follows
IEC 60068-2-64
EMC
CE, FCC Class A
Front Panel
Protection IP65 compliant
Note: *1 x DP (for connecting the motherboard and LVDS panel)
**1 x USB 2.0 (for connecting the motherboard and touch controller)
Specifications (Cont.)
To mount the flat-bezel panel PC, follow the steps outlined
below.
1. Prepare a panel cutout according to the panel PC
dimensions.
Cutout dimensons for PPC-6151C:382 x 303 mm
(15.03 x 11.92 in); PPC-6171C:427 x 347 mm (16.81 x
13.66 in); PPC-6191C:444 x 370 mm (17.48 x 14.56 in).
2. Insert the panel PC into the cutout. Retrieve the hook
brackets and M6 x 21L screws from the accessory box
(10 for PPC-6151C/6171C and 12 for PPC-6191C).
Hook brackets for panel mounting
3. Insert the hook brackets into the holes in the direction
of the arrow shown in the figure below. Then hang the
panel PC onto the hook brackets.
Panel Mounting (Cont.)
4.
Tighten the hook bracket screws to affix the panel PC
in place.
Fasten the hook bracket
