53
ARK-2151V User Manual
Chapter 5
B
IOS settings
5.2.2.11
USB Configuration
Figure 5.14 USB Configuration
Legacy USB Support
Enable support for legacy USB. Auto option disables legacy support if no USB
devices are connected.
USB3.0 Support
This item allows users to enable or disable USB 3.0 support.
XHCI Hand-Off
This is a workaround for the OS without XHCI hand-off support. The XHCI own-
ership change should claim by XHCI driver.
EHCI Hand-Off
This is a workaround for the OS without EHCI hand-off support. The EHCI own-
ership change should claim by EHCI driver.
USB transfer time-out
Set the time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
Set USB mass storage device Start Unit command time-out value.
Device power-up delay
Set the maximum time of the device will take before it properly reports itself to
the Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a
Hub port the delay is taken from Hub descriptor.
Summary of Contents for ARK-2151V
