13
Chapter 2
2.3 Cooling Fans
There are two (2) cooling fans located inside the chassis. The cooling fans
are easy to maintain and provide adequate cooling to the system by draw-
ing air into the chassis.
Figure 2.9: Cooling Fans
2.4 Installing CPU Cards
To install single board computers and other add-on boards:
1.
Remove the chassis cover.
2.
Take out the hold down clamp
3.
Insert the SBC or add-on cards in a suitable location
4.
Connect the cables to the CPU Card as instructed
5.
Insert and tighten the screws to fix the card into position
6.
Put back the top cover after fastening the hold down cramp
Summary of Contents for ATM-4023
