BB-USR604
9
SECTION 3
QUICK START GUIDE
The following Quick Start Guide outlines the basic steps to get your BB-USR604 converter up and running:
1.
Check for included items:
•
4 port industrial USB to serial converter
•
Driver CD
•
Two meter USB cable
•
Panel mount adapters
•
DIN rail mount adapter
•
Printed quick start guide
2.
Install the driver software
(see "
" on page 11)
•
The CD contains a driver installation program. Install the drivers before connecting the converter to
your PC.
•
Put CD into drive. The installation program should launch automatically.
•
Follow the prompts.
3.
Mount the converter (DIN rail or panel mount)
•
DIN rail mount
•
Locate the DIN rail kit
•
Mount on back of converter using screws
•
Clip to a DIN rail
•
Panel mount:
•
Locate the panel mount kit
•
Mount brackets to converter using screws
•
Mount in panel
4.
Connect power
(see "
" on page 16):
•
Connect 10 to 48VDC to terminal block and/or barrel jack.
5.
Check
LED Indicators
(on page 22)
•
Power indicated by green Pwr LED
•
Tx and Rx LEDs will indicate when data present
6.
Set up the COM Port operating modes
(see "
Setting COM Port Operating Modes
" on page 19)
Summary of Contents for BB-USR604
