110
EKI-7708 Series User Manual
The following table describes the items in the previous figure.
The ensuing table for
PoE Information
settings are informational only: Port, Enable
State, Power Limit From Classification, Priority, Legacy and Power Limit (W).
4.9.3.3
PoE Port Status
To access this page, click
Management
>
Power Over Ethernet
>
PoE Port Status
.
The ensuing table for
PoE Port Status
settings are informational only: Port, Current
(mA), Voltage (V), Power (W) and Temp. (°C).
4.9.4
TCP Modbus Settings
The TCP Modbus function allows for client-server communication between a switch
module (server) and a device in the networking running MODBUS client software
(client).
4.9.4.1
TCP Modbus Settings
The TCP Modbus Settings page allows you to configure the modbus function.
To access this page, click
Management
>
TCP Modbus Settings
>
TCP Modbus
Settings
.
Figure 4.112 Management > TCP Modbus Settings > TCP Modbus Settings
The following table describes the items in the previous figure.
The ensuing table for
TCP Modbus Status
settings are informational only: TCP
Modbus status and TCP Modbus time out.
Item
Description
Port
Click the drop-down menu to select a PoE port.
Enabled
Select
Enabled
or
Disabled
to designate the PoE port function by
ports.
Power Limit From
Classification
Select
Enabled
or
Disabled
to designate the power limit
classification.
Legacy Mode
Select
Enabled
or
Disable
d to designate the legacy mode option for
the port.
Priority
Click the drop-down menu to configure the power supply priority:
Critical
,
Low
,
Medium
or
High
. Default is
Low
.
Power Limit
Enter a number to set the port power current limitation to be given to
the Powered Device (PD)
Apply
Click
Apply
to save the values and update the screen.
Item
Description
State
Click
Disabled
or
Enabled
to set the TCP Modbus state.
Time out
Enter the value (1 to 86400) to define the timeout period between
transport time.
Apply
Click
Apply
to save the values and update the screen.
Summary of Contents for EKI-7708 Series
