EKI-7708 Series User Manual
65
4.5.10.3
STP Bridge Settings
The STP Bridge Settings page allows you to configure the priority, forward delay,
maximum age, Tx hold count, and the hello time for the bridge.
To access this page, click
L2 Switching
>
Spanning Tree
>
STP Bridge Settings
.
Figure 4.41 L2 Switching > Spanning Tree > STP Bridge Settings
The following table describes the items in the previous figure.
The ensuing table for
STP Bridge Information
settings are informational only:
Priority, Forward Delay, Max Age, Tx Hold Count and Hello Time.
The ensuing table for
STP Bridge Status
settings are informational only: Bridge
Identifier, Designated Root Bridge, Root Path Cost, Designated Bridge, Root Port
and Last Topology Change.
Item
Description
Priority
Click the drop-down menu to select the STP bridge priority.
Forward Delay
Enter the variable (4 to 30) to set the forward delay for STP bridge
settings.
Max Age
Enter the variable (6 to 40) to set the Max age for STP bridge settings.
Tx Hold Count
Enter the variable (1 to 10) to designate the TX hold count for STP
bridge settings.
Hello Time
Enter the variable (1 to 10) to designate the Hello Time for STP bridge
settings.
Apply
Click
Apply
to save the values and update the screen.
Summary of Contents for EKI-7708 Series
