EKI-7708 Series User Manual
113
4.9.5.4
Option 82 Settings
The Option 82 Settings, also known as the DHCP relay agent information option,
provide information about the network location of a DHCP client. In turn, the DHCP
server uses the information to implement IP addresses or other parameters for the
client.
To access this page, click
Management
>
DHCP Server
>
Option 82 Settings
.
Figure 4.116 Management > DHCP Server > Option 82 Settings
The following table describes the items in the previous figure.
The ensuing table for
Entry Information
settings are informational only:
Entry
(click
the drop-down menu to select an entry), Entry ID, Circuit ID Format, Circuit ID
Content, Remote ID Format, Remote ID Content, Low IP Address, High IP Address,
Item
Description
Entry
Click the drop-down menu to select an entry for the Option 82 setting.
Circuit ID Format
Click the drop-down menu to select the format of the circuit ID: string
or hex.
Circuit ID Content
Enter the circuit ID string on the switch on which the request was
received.
Remote ID Format
Click the drop-down menu to select the format of the remote ID: string
or hex.
Remote ID Content
Enter the remote ID string of the host.
Low IP Address
Type in the value designating the lowest range in the IP address pool.
High IP Address
Type in the value designating the highest range in the IP address
pool.
Subnet Mask
Type in the value designating the subnet mask for the IP address
pool.
Gateway
Type in the value designating the gateway for the IP address pool.
DNS
Type in the value designating the DNS for the IP address pool.
Apply
Click
Apply
to save the values and update the screen.
Summary of Contents for EKI-7708 Series
