EKI-9226G Series User Manual
87
Entry List
To access this page, click
Security
>
Access Control List
>
MAC ACL
>
Entry List
.
The ensuing table for
MAC ACL Information
settings are informational only: Entry
ID, Summary, Portlist, Action, Status and Modify (Click
Edit
to edit the desire entry id
or
Delete
to delete the desired entry id).
4.7.9.2
IP ACL
Entry Settings
To access this page, click
Security
>
Access Control List
>
IP ACL
>
Entry Set
-
tings
.
Figure 4.83 Security > Access Control List > IP ACL > Entry Settings
The following table describes the items in the previous figure.
Item
Description
Entry ID
Type in the value designating the entry ID.
Destination IP
Address
Enter the IP address to set destination IP address.
Destination IP Mask Enter a value to specify the subnet mask for the destination IP
address.
Source IP Address
Enter the IP address to set source IP address.
Source IP Mask
Enter a value to specify the subnet mask for the source IP address.
IP Protocol
Click the drop down menu to select the IP protocol. Options include:
none, ICMP, TCP or UDP.
L4 Destination Port
Enter a value to specify the L4 destination port.
L4 Source Port
Enter a value to specify the L4 source port.
Portlist
Select the port to configure for the IP ACL function.
Action
Click the drop down menu to select the IP ACL action. Options
include: Permit, Drop or Assign Queue.
Summary of Contents for EKI-9226G Series
