FPM-5151G/5171G/5191G Series User Manual
16
A.1
Introduction
The FPM-5151G/5171G/5191G Series optional touchscreen uses advanced 5-wire
resistive technology. It provides more accurate sensing capacity than other
technologies. The touchscreen is specially designed for tough industrial
environments, and has been approved to FCC Class A standards.
A.2
Touchscreen Specifications
A.2.1
Electrical Specifications
Operating Voltage:
5.5V or less
Capacitance:
100nF(maximum)
A.2.2
Environment Specifications
Operating Temperature:
-10 ~ + 60°C
Storage Temperature:
-40 ~ +80°C
Humidity:
if 40° C, humidity <80% RH
if 40° C, humidity < 90% RH No dew condensation
A.3
Installing Driver for Windows OS
The touchscreen has drivers for Win 2000/2003/XP/CE/Vista/Win7/Linux/MS-DOS.
You should read the instructions in CD-ROM Disk Touchscreen section carefully
before you attempt installation. The FPM-5151G/5171G/5191G-R series need to
install Penmount 6000 driver. Please find Penmount 6000 folder and install the driver
into your system.
Note!
RS-232 & USB touchscreen interface does not allow connection to the
system at the same time. It can be changed by switch.
Note!
The driver manual are examples only. You must follow the flow chart
instructions and pay attention to the instructions which then appear on
your screen.
Note!
The USB & RS-232 cable not allow to connect to system at the same
time.
Note!
USB & RS-232 interface driver is different, uninstall previous driver
before installing a different driver.
Note!
If there is any others OS driver need, could download at the web site:
http://www.penmount.com.tw (Penmount 6000)
