Installing the 2.5’ HDD
1
．
Take out the HDD rubbers and screws from the accessory
box ,and push the rubbers into the hole on the bracket;
2
．
Install the 2.5’ HDD in the bracket with four screws.
3
．
Fix the HDD and bracket in the chassis.
SATA port need be
forward to the power. Connect and place the cables as the
picture shows.
Installing Express Modules
1
．
Release the 2 screws. Push the lower half of the baffle and
take it out
；
2
．
Insert the express module into the case and tighten the
screws.
Installation
