ICR-2431
4.6
Parameters of I/O Ports
Electrical characteristics of the binary input are in Table
. Status of the binary input is
reported in the GUI on
General Status
page or can be retrieved in the Shell via
io get bin0
command.
get
command output
Voltage
Web interface status
0
≤
0.8 V (0.5 mA))
On
1
≥
2 V
Off
Table 16: Electrical Characteristics of Binary Input
The maximum binary output load is
100 mA
at
9 – 48 V
.
4.7
Parameters of Serial Interfaces
Supported parameters of the RS232 and RS485 interfaces, which can be configured in
Expansion Port 1
resp.
Expansion Port 2
menu items, are in Table
Parameter
Description
Baudrate
300, 600, 1200, 2400, 4800,
9600, 19200, 38400, 57600,
115200, 230400.
Data Bits
5, 6, 7, 8.
Parity
none, even, odd.
Stop Bits
1, 2.
Flow Control
none, hardware.
Table 17: Parameters of Serial Interfaces
29