IPC-622MS User's Manual 1
Chapter 1 General Information
1.1 Introduction
The IPC-622MS is a 20-slot, 19" rackmount industrial PC chassis with 400-watt AC-DC power supply.
IPC-622MS features an advanced fault detection and alarm notification system to monitor its own
hardware status, including overheating and fan-failure problems. It is dangerous and will cause a lot of
loss if your PC system shuts down without any warning in advance. IPC-622MS , the fault resilient IPC,
is designed to prevent from this situation to be more relibile.
The IPC-622MS will withstand shock, vibration, dust and a wide range of operating temperatures in
harsh environments. The chassis is positively pressurized by six filtered push-pull cooling fans to exclude
dust and dirt. A lockable door protects drives and switches from tampering and particles.
1.2 Specifications
General
Construction
: Heavy-duty steel
Disk drive capacity
: Six 3.5" disk drives
Cooling system
: Four 49 CFM cooling fan (flow in) in front and two 49CFM coolomg fans (flow
out) in rear panel with an air filter
Controls
: Power On/Off switch, CPU reset and alarm reset button are protected by a lockable door
Indicators
: LEDs for power On/Off and HDD activity. Bi-color LEDs(green and red) for fan failure
failure and overheating
Speaker
: One 8 ohm / 0.2Watt speaker, volumn control on board
Dimensions
: 19" (W) x 10.5" (H) x 18" (D)
482mm(W) x 267mm(H) x 457 mm(D)
Weight
: 66 lb (30 Kg)
Paint color:
Pantone 414U
Passive Backplane (PCA-6119P17)
Slots
: 17PCI / 1PICMG -slot
PC board
: 4-layer PCB with ground and power planes for reduced noise and lower power
supply impedance
Indicators
: LEDs for +5 V, -5 V, +12 V and -12 V
All manuals and user guides at all-guides.com
