7
Chapter 2
Taking a look at back side of the computer, you can see the system I/O
ports region, as shown in Figure 2.3. (I/O interface, VGA interface, line
input / output interface)
Figure 2.3: IPPC-4008 Back View
2.2 System Installation Steps
2.2.1 Attaching the Handles
The handles for the front panel are in the accessory box. To install the
handles, simply secure them to the front panel with the provided screws.
2.2.2 Removing the Top Cover
First, remove the chassis cover.
The top cover is fixed to the chassis by two thumbscrews
To remove the top covers:
1.
Release two thumbscrews on the rear upper location of the chassis.
2.
Lift the cover.
WARNING
Before starting the installation process, be sure to
shut down all power from the chassis. Do this by
turning off the power switch, and unplugging the
power cord from the power outlet. When in doubt,
consult with an experienced technician.
