9
Chapter 2
2.2.4 Installing the CPU
IPPC-4008D uses PCA-6108P8 as the B/P part with 8 PCI slots. And the
CPU is required to lock in the CPU PCI slot, B/P indicates that, please be
careful! The installation steps are as follows:
1.
Remove the top cover
2.
Firstly remove the fixed bead from the chassis;
3.
Then remove the corresponding CPU bracket from the chassis back
window;
4.
Take out the CPU bracket and screws in the annex box;
5.
Lock this bracket with two screws on the CPU;
6.
Insert the locked CPU to CPU socket of the B/P and fix it with
screws. As shown in Fig2.5.
Figure 2.5: CPU Installation
2.2.5 Installing VGA and PS/2 Lines
VGA & PS / 2 lines are attached in the annex box, please connect them to
VGA & PS / 2 interface of the chassis with the CPU.
