5
MIC-3396 User Manual
Chapter 1
H
ardware
C
onfiguration
One yellow color LED indicates HDD activity.
One green color LED provides power status. When the LED is green, it means
power is provided to the board.
One green color LED indicates “Master” or “Drone” mode. The green color
stands for “Master: mode. When the LED is off, the board is in “Drone” mode.
One green color LED indicates BMC status. When the LED is green, it means
BMC is active.
1.2.12
Watchdog Timer
An onboard watchdog timer provides system reset capabilities via software control.
The programmable time interval is from 1 to 255 seconds.
1.2.13
Optional Rear I/O Modules
The RIO-3316 is the optional RTM (also known as rear I/O module) for the MIC-3396.
It offers a wide variety of I/O features, such as two or four RJ45 LAN ports, two COM
ports, two DVI ports, one USB3.0, one USB2.0 port, one P/S2 port. RIO-3316-D1E
can carrier an on-board 2.5” HDD, which support SATA Gen II, and provide two GbE
LAN ports, one PS/2, two USB2.0 and one display port. Rear I/O modules are avail-
able with following different I/O options:
1.2.14
Mechanical and Environmental Specifications
Operating temperature:
0 ~ 55 °C (-32 ~ 122 °F)
Storage Temperature:
-40 ~ 85 °C (-40 ~ 185 °F)
Humidity:
95% @ 40 °C (non-condensing)
Humidity (Non-operating):
95% @ 60 °C (non-condensing)
Vibration:
5~100Hz, 2Grms (without on-board 2.5” SATA HDD)
Shock:
10G (without on-board 2.5” SATA HDD)
Bump:
25G, 6ms
Altitude:
15000ft above sea level at 55 °C
Board size:
233.35 x 160 mm (6U size), 1-slot (4 TE) wide
Weight:
0.8 kg (1.76 lb.)
1.2.15
Compact Mechanical Design
The MIC-3396 has a specially designed CPU heatsink to enable fanless operation.
However, forced air cooling in the chassis is needed for operational stability and reli-
ability.
Table 1.3: RIO-3316 Configuration
RTM Model
Number
Rear Panel
On-board Header/Socket/Connector
LAN COM DVI-I DVI-D PS/2
USB
2.0
USB
3.0
Mini-
SAS
USB SATA
SAS /
SATA
interface
Conn.
RIO-3316-C1E
4
1
1
1
1
1
1
-
2
2
-
J3,J4,J5
RIO-3316-D1E
2
-
-
-
1
2
-
-
2
2
-
J3,J4,J5
Note!
The operating temperature range of the MIC-3396 depends on the
installed processor and the airflow through the chassis.
Summary of Contents for MIC-3396
