48
PCA-6154/6154L User's Manual
A:
<ENTER> to make this the default drive.
SETUP A:
C:
<ENTER>
where A: is the floppy disk drive, and
C: is the hard disk partition containing \OS2
When the setup program is completed, you will need to perform a
shutdown and then restart the system in order for changes to take
effect.
A log of the information output during the install can be found in
<root>:\OS2\INSTALL\DISPLAY.LOG
4. After restarting the system:
a) Open the OS/2 System folder.
b) Open the System Setup folder.
c) Open the Display Driver Install Object.
Steps a), b) and c) will execute the Display Driver Installation
(DSPINSTL) utility program to finish installation of the new
drivers.
d) When the Display Driver Install window appears, select
Primary Display and then select OK.
e) When the Primary Display Driver List window appears,
select “Chips and Technologies 65550/554” from the list of
adapter types. Then select OK to install the video driver.
f) When the installation is complete, you will need to shut
down and then restart the system for the changes to take
effect. Make sure you remove the install diskette before
restarting the system.
When the system has restarted, the display driver will be initialized
for 640 x 480 x 256 color, 60 Hz refresh. To switch to a different
video resolution color depth or a different refresh rate, see the
following sections.
