ROM-5720 User Manual
26
5.1
System Recovery
This section provides detailed procedures for restoring the eMMC image. If you
destroy the onboard flash image by accident, you can recover the system by follow-
ing these steps.
5.1.1
Recovery by SD Card
1.
Copy 5720A1AILIV90022xx to your desktop
2.
Insert SD card to PC
3.
Make a bootable sd card
4.
Insert SD card and copy 5720A1AIM20LIV90022_iMX8M_flash_tool to USB
disk
5.
Insert USB disk and SD card then Boot from SD
6.
Enter usb disk folder, make a bootable emmc
5.1.2
Recovery by UUU Tool
1.
Download uuu tool from (https://github.com/ADVANTECH-Corp/uuu/releases/
tag/v20191101)
2.
Create a folder with files as below:
1) uuu
2) imx-boot-imx8mqrom5720a1-sd.bin-flash_evk
3) fsl-image-validation-imx-imx8mqrom5720a1-
20190917152605.rootfs.sdcard
3.
Connect otg cable from PC to device
4.
Set the correct boot mode on the carrier board, then power on
Perform the following command:
5.
uuu tool will start recovery image to emmc.
6.
For more usage
https://github.com/NXPmicro/mfgtools/wiki
# tar zxvf 5720A1AIM20LIV90022_iMX8M_flash_tool.tgz
# cd 5720A1AIM20LIV90022_iMX8M_flash_tool/mk_inand/
# sudo ./mksd-linux.sh /dev/sdg
# cd /run/media/sda1/
# cd 5720A1AIM20LIV90022_iMX8M_flash_tool/mk_inand/
# sudo ./mksd-linux.sh /dev/mmcblk0
sudo ./uuu -b emmc_all imx-boot-imx8mqrom5720a1-sd.bin-flash_evk fsl-
image-validation-imx-imx8mqrom5720a1-20190917152605.rootfs.sdcard
Summary of Contents for ROM-5720
