Advantech UTC-W101E, User Manual

v

UTC-W101E User Manual

17.

CLASSIFICATION:

–

Supply by Class I adapter

–

No applied part

–

Continuous Operation

–

Not AP or APG category

18.

Follow the national requirement to dispose unit.

19.

Maintenance: to properly maintain and clean the surfaces, use only the 
approved products or clean with a dry cloth.

20.

Contact information:
No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei, Taiwan 114, 
R.O.C
TEL: (02)27927818

21.

22.

This equipment shall not be used as a life support system.

23.

Accessory equipment connected to the analog and digital interfaces must be in 
compliance with the respective nationally harmonized IEC standards (i.e. IEC 
60950 for data processing equipment, IEC 60065 for video equipment, IEC 
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.) 
Furthermore all configurations shall comply with the system standard IEC 
60601-1-1. Anyone who connects additional equipment to the signal input part 
or signal output part is configuring a medical system, and is therefore, responsi-
ble that the system complies with the requirements of the system standard IEC 
60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certified 
equipment in the patient environment and IEC 60XXX certified equipment out-
side of the patient environment. If in doubt, consult the technical services 
department or your local representative. 

24.

User not to connect SIP/SOPs and the patient at the same time.

25.

The sound pressure level at the operator's position according to IEC 704-1:1982 
is no more than 70dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

Note!

Attention, consult ACCOMPANYING DOCUMENTS.