WISE-3200 Series User Manual
28
3.4.1.2
Configuration
1.
General page:
This option should not be changed.
Figure 3.19 WISE Cellular Router Configuration General Page
2.
Primary SIM page:
Users should change APN value to that of a local telecom
SIM card. The SIM card pin code depends on the users’ settings.
3.
This will auto-connect to the Internet after the user enters SIM card information
and clicks save & apply.
Available options are detailed below:
–
PIN: The PIN code is determined by local telecom services and has varying
values.
–
PUK: The personal unblocking key is used to unlock the system if users enter
an incorrect PIN more than three times. In these cases the SIM card will be
locked at the same time. Users can contact the telecom operator to get a set
of PUKs. Users then enter them into the correct field and unlock the system.
–
APN: Users should acquire an APN from the SIM card's local telecom pro
-
vider.
–
USER: Users should acquire a user name from the SIM card's local telecom
provider.
–
PASS: Users should get a password from the SIM card's local telecom pro
-
vider.
–
Operator Selection Mode: This option suggests using Auto unless user
knows how to configure options.