Advent ADVEXL12A, Installation Manual

13

INSTALLING ThE AdvEXL12A vIdEO SySTEm - wIrING dIAGrAm

A/V Sources:

• 

DVD / CD

• 

USB Input

• 

HDMI1 Input (MHL/HDMI)

• 

HDMI2 Input (HDMI only)

• 

Media (e.g. iPod, iPhone, iPad)

• 

AV - Signal Harness to the 3 RCA 

Jack Pigtail is used for AV Input.

• 

AUX - AUX Input 

• 

Setting

• 

Game

wIrING dIAGrAm

6 Pin Power/Dome Light Harness

(P/N: 112-4270) 

5 Pin AV Output Harness

(P/N: 112-4260) 

5 Pin AV Input Harness

(P/N: 112-4259)

1.6M HDMI Cable(Optional)

WM1(Optional) 

MVGP1(Optional) 

1.  Connect the dome light wires as shown on pages 10 and 11 of this 

install manual.  

2.  Connect the input power wires of the 6 pin Power/Dome Light 

Harness to the vehicle’s electrical system by tapping into an 

accessory hot line and a good ground.  

Note: 

This connection 

must be fused at the vehicle connection point.

3.  Plug the 6 pin Power/Dome Light Harness into the unit in the 

location shown.

4.  If connecting to an external source, plug in the 5 pin AV Input 

Harness (P/N: 112-4259)  in the location shown.  Connect RCA 

cables (not supplied) to the external source’s AV Output. 

5.  If connecting to a second screen AUX Input or head unit AUX Input, 

plug in the 5 pin AV Output Harness in the location shown and 

connect RCA cables (not supplied) to the AV Input of the second 

screen or head unit.

6.  Verify all system functions before permanently mounting the unit.

*Note:  

The antenna has been designed for optimal performance. When 

installing the unit, position the antenna for best reception.