Automating The System Using Schedules
17
Preliminary 8/23/00
To set a one-time schedule:
Setting Weekly Schedules
Any automatic actions (lights, devices, access codes) set to
use this weekly schedule will repeatedly activate on the
days and times set.
Note
If an off-time is set to be earlier than the on-time, the
off-time is understood to be for the next day.
For setting non-repeating schedules, see Setting One-Time
Schedules.
Steps
Response (if any)
1. Press
7, 4,
ACCESS
CODE
.
FEATURES
MENU
,
SCHEDULES
Select Schedule Number
2. Enter desired schedule number,
#
or press
0, #
to list schedules
or press
0, 0, #
to enable temporary schedules.
SCHEDULE
NUMBER
LIST
OF
SCHEDULES
TEMPORARY
SCHEDULES
ENABLED
Set as One-Time (vs. Weekly)
3. Press
0
to indicate
ONE
-
TIME
(if the system says
SCHEDULE
VALID
ON
NO
DAYS
, for
example) and press
#
to accept
.
ONE
-
TIME
Set On-Time
4. Press
#
to accept present schedule ON-time
or enter desired on-time (for example
440
for
4:40
) and press
#
. Enter
0
, # for no
on-time.
PRESENT
ON
-
TIME
NEW
ON
-
TIME
5. Press
1
for
A.M.
or
2
for
P.M.
Set Off-Time
6. Press
#
to accept present schedule off-time
or enter desired off-time (for example
440
for 4:40) and press
#
. Enter 0, # for
no off-time.
PRESENT
OFF
-
TIME
NEW
OFF
-
TIME
7. Press
1
for
A.M.
or
2
for
P.M.
Set Condition Type
8. Press
#
to accept present schedule condition type
or enter desired type and press
#
. Enter 0, # for no schedule (inactive) type.
Schedule Types are:
1- Normal
2- Holiday A
4- Holiday B
8- Temporary
For combinations, for example, enter type
5
for Normal and Holiday B.
PRESENT
SCHEDULE
CONDITION
TYPE
NEW
SCHEDULE
CONDITION
TYPE
Set Arming Type
9. Press
#
to accept present schedule arming type
or enter desired arming type and press
#
. Enter 0, # for no arming type.
Arming Types (ON Transition/Off Transition) are:
0- None/None
1- Disarm/Arm
2- Arm/Disarm
3- Arm/None
4- Disarm/None
5- None/Arm
6- None/Disarm
Add 8 to the number to also make this an open/close schedule. For example, for
arming type 1 as also open/close, enter 9.
PRESENT
ARMING
TYPE
NEW
ARMING
TYPE
10. Press
*, *
to exit this menu.
DATA
SET
FOR
THIS
SCHEDULE
IS
INDICATED
GOODBYE
