©2006 Adventistsat.com
28
Basic Operation
Turn the satellite receiver ON/OFF using
the POWER button.
Change channels by either entering the
channel on the numeric keypad or by
pressing CH/UP or CH/DOWN buttons.
The volume is adjusted by pressing the
VOL/UP or VOL/DOWN buttons. This
does not affect the audio level during a
recording to the hard drive.
Note: Volume
is also controlled by the TV. AdventistSat
suggests that the satellite receiver volume be set at mid-level
and use the TV to adjust the sound level.
The TV/RADIO button select between viewing the satellite
TV channels or listening to satellite radio services.
Channels may offer alternative audio translations or additional
audio services. Press the AUDIO button to determine if
additional audio selections are available. Press CH/UP or CH/
DOWN to select alternative audio then the EXIT button.
Note:
This selected source will be the default audio when this channel
is selected.
Press the RECORD button to start a recording of current
programming.
The TIMER button sets schedule for recording at future time.
The LIST button displays all programs currently recorded on
the hard drive. These programs can be viewed while a current
program is being recorded.
The receiver features many of the controls necessary for basic
operation of the satellite system in case the remote is misplaced.
* See the DVR1000ci Owners Manual for additional features.