7
WARNING
The LCD display must be turned on before operating air compressor. Please read and understand
the instructions provided in the manual prior to operation.
Use a separate pressure gauge for more accurate reading.
12. Emergency lamp by the combination of 18 LED’s. Turn on the button, LED will shine white,
press again it will flash red, press again and it will flash red SOS.
13. Accessory 1 is suitable for inflating balls and Accessory 2 is suitable for inflating balloons
and air cushions.
INFLATING ITEMS WITH ADDITIONAL TIPS
1. Loosen the attachment lock approximately 3 rotations counter-
clockwise (See Fig 6). Do not remove lock completely.
2.
IMPORTANT:
Insert the tip into the attachment lock. Press
in firmly while screwing in clockwise until it can go no further
(See Fig 7).
3. Tighten attachment lock clockwise until hand tight.
4. Press the power button below the LCD display to turn on. (See
Fig 8)
5.
NOTE:
After 30 Seconds of inactivity, the digital tyre gauge will
turn off automatically to conserve energy.
6. Insert the tip adapter into the inflatable object and push trigger.
7. Allow the air compressor to run until fully inflated.
8. Remove tip adapter from the inflated object quickly and
replace valve cover if required.
NOTE:
The pressure gauge will only provide an estimated reading.
Summary of Contents for AKAC-LITAIR 01
Page 4: ...4 INCLUDED IN THE BOX...
