11
11
STEP
5
STEP
4
STEP
3
STEP
2
12. TROUBLESHOOTING
Fridge concern is
not cooling, running for only a short period, error code
shown etc
.
The above concerns can have several causes. The following helps confirm where
the issue lies.
Rest the fridge
. If the fridge has turned on and off too quickly, a number of
errors can occur. Disconnect the fridge from all power sources for 15 minutes.
This acts as a reset for the fridge’s electrical and refrigeration system.
Power source issue
. One of the most common issues stem from power
source issues. Connect the fridge for at least 30 minutes to 2 different power
sources, for example a suitable house based 240 Volt socket and a vehicle with
the engine running.
If this corrects the issue with the fridge, the source of the concern is outside the
fridge. The fridge itself does not operate differently based on the power source,
if the power to the fridge is in the correct range and consistent the fridge will
operate.
Typical issues are related to wiring issues, under charged batteries and connection
problems.
Fridge setting issues
. Incorrect settings can cause operation issues. If the
fridge has an adjustable Voltage cut-off, set to the lowest value for testing. For
testing the unit should be empty, as a warm/large product load in the fridge can
take more than 24 Hours
If the fridge is not operating correctly
after the above tests
, or the fault is
outside those listed and is a manufacturing defect (fridge still not cooling, works
on DC but not on AC power, broken fan etc.) then please follow warranty claim
procedure on the last page of this manual.
STEP
1
12.1 FRIDGE TROUBLESHOOTING FLOW CHART
