14
CLEANING AND ADJUSTING THE
SPARK PLUG
1. Remove the cover.
2. Check for discoloration and remove any carbon
buildup.
3. Check the spark plug type and gap.
4. Install the spark plug.
5. Install the cover.
CAUTION
• Standard electrode color:
Tan Color.
• Standard Spark Plug:
A5RTC (TORCH)
• Spark Plug Gap:
0.6-0.7 mm (0.024-0.028 in)
FUEL TANK FILTER
1.
Remove the fuel tank cap and filter.
2.
Clean the filter with solvent. If damaged, replace.
3.
Wipe the filter and insert it.
WARNING
• Be sure the tank cap is securely tightened.
MUFFLER SCREEN
WARNING
•
The engine and muffler will be very hot after the
engine has been run.
•
Avoid touching the engine and muffler while they are
still hot with any part of your body or clothing during
inspection or repair.
a
Summary of Contents for AKGE-2.2KGE 01
Page 18: ...18 9 WIRING DIAGRAM 2200I 240V...