2
SAFETY INFORMATION
INCLUDED IN THE KIT
• Make sure to keep your solar blanket, Pulse Width Modulation (PWM) controller & battery
away from any liquids at all times.
• Keep the solar blanket and controller clean at all times (always check connectors to ensure
they’re free of grit before plugging them in).
• This appliance is not intended to be used by people (including children) with reduced
physical or mental capabilities, or those who are under the influence of drugs or alcohol.
• Do NOT use the solar blanket to charge non-rechargeable batteries, doing so may result
in harm to the user and/or damage the solar blanket and controller. Only use the provided
solar blanket, regulator and adapters/wiring provided in the kit.
• All lead-acid batteries produce harmful, explosive gases. The battery should be mounted in
a well-ventilated area, as far as possible from any ignition sources. Do NOT smoke or have a
naked flame in the vicinity of the battery under charge.
• Never tamper with or pull any component of the solar blanket, regulator or wiring apart. If
you do so, you will void the warranty.
• Always store the solar blanket neatly in its bag, protected from the weather and with good
ventilation.
• Ensure nothing sharp or heavy could potentially damage the solar blanket during transport
or storage.
• Only use the solar blanket to charge 12V batteries.
• The PWM controller is only suitable for regulating solar modules.
• The PWM controller is only suitable for lead-acid batteries: OPEN, AGM & GEL. The Solar
Blanket & Controller should not be used with nickel metal hydride, lithium ion or other
batteries.
• Never connect another charging source to the PWM controller.
• Do not place the solar blanket on your vehicle’s bonnet or paintwork during use.
1 X 120W SOLAR BLANKET
1 X 4.4M EXTENSION LEAD
1 X PWM CONTROLLER
