10
10
FITTING THE ROOF TOP TENT TO YOUR ROOF RACK
1. Place the Roof Top Tent on top of your vehicle’s roof rack system
(minimum 2 persons required).
2. Place
55mm Steel M8 bolt
into the slide plates. Slide the plates and bolts into the
mounting channel. You will need to lift a Roof Top Tent side, so as to have one of
the bolts on the inside of the roof rack bar.
3. Inspect the position of Roof Top Tent to ensure it is centered on the roof rack and
positioned to open the desired side.
DIAGRAM D
4. Attach the Roof Top Tent to your roof rack at the four points where the rack and
mounting channels cross. Tighten all eight bolts securely. It is important that you
check all the mounting bolts and brackets periodically to ensure they are securely
fastened to your base and roof rack or after-market roof bars.
5. After ensuring the Roof Top Tent is positioned correctly, and all eight bolts are
tightened securely, insert the rubber end caps into the ends of the mounting
channel (this may require light taps from a hammer).
Roof Top Tent Base
Mounting Channel
Slide Plate
55mm Steel M8 Bolt
Steel Mount Plate
M8 Nylock Nut
After-Market Roof Rack Bars
J001157 - Adventure Kings RTT Manual-Insert2.indd 10
7/05/2014 10:11:37 a.m.
AK_RTT_Manual.indd 10
29/08/2014 12:24 pm
