background image

7

Adventure Kings 65L Fridge

POWERING ON

Connect to the desired input voltage and press the         button to turn the unit on, the 

display will show the current internal fridge temperature.

ON

OFF

      

TEMPERATURE CONTROLLER

The Temperature Controller provides the ability to set the desired temperature level and 
displays information on the fridge and set temperature.

The controller has been programmed to maintain an average of the set temperature. The
compressor will start up when the internal temperature increases 0.5 to 1.5 degrees 
above that selected and will run until the temperature is 0.5 to 1.5 degrees below the set 
temperature.

LEFT 

ZONE

RIGHT 

ZONE

When your appliance is first connected to AC or DC input the digital readout will show the 

current temperature - the temperature shown on the ‘LEFT ZONE TEMP’ display 
corresponds to the larger Left Zone compartment; the temperature on the ‘RIGHT ZONE 
TEMP’ display corresponds to the stepped Right Zone compartment.

To increase the fridge temperature press      and to decrease press       until the desired 
level is reached.

Once selected the display will flash a number of times before returning to the current 

temperature.

NOTE: The left side can only be set to an equal or higher temperature of the right side

Summary of Contents for YCD65













Reviews: