(3)
Back valve
Center valve
Front valve
Insert the pump nozzle
firmly before pumping
Front door
(3a)
(4)
Centre
air pole inflated
Centre and back
air poles inflated
Centre, back and front
air poles inflated
Step 2
Locate the center inflation valve (3). Unscrew the inflate valve cap and attach
pump nozzle (3a). Start to pump. As the air pole inflates the tent will begin to
take shape (4). It may be necessary help push up the pole so it can easily assume
the correct shape.
Inflate the air pole until it feels hard to the touch. The maximum air pressure
is 7 PSI. It does not matter if you do not reach this, as long as the air pole feels
hard to the touch.
Once the air pole is inflated remove the pump nozzle, the air will not escape as
this is a one way valve. Close the inflate valve cap. Repeat for back air pole and
front air pole.
Check the positioning of the groundsheet pegs again. If necessary re-peg to
ensure that the groundsheet is taut inside the tent.
4
