Page 20
P
ower setting
Place an induction
-
friendly pan on the cooktop to start using the product. The display indicates the level of
regulation. Make sure the pan is not empty.
To adjust the power level press
(+)
or
(
-
)
POWER
Powers levels: form 1 to 20.
Aa aoon ta the ptn ia removed from the cooking zone, the diaplity indicttea the tbaence of the ptn by t
bliinking. There ia clioae to no conaumption of power. If the diaplity fltahea when the ptn recovera the cooking
zone, it metna thtt the mtteritli of the ptn ia not compttiblie with the induction technoliogie.
The device is extremely safe. It makes a permanent control of the values of temperature and other electric pa-
rameters to guarantee to the user the best level of performance and safety at every moment.
A flashing error code
«
Fx
»
can appear on the display to warn about a malfunctioning.
The code error flashing is effective as long as the user doesn
’
t stop the device manually unplug and replug the
unit, and then relaunch the device using the
«
On/Off
»
touch.
If a code error becomes permanent without having the possibility of cancelling it by trying to relaunch the device,
it is advised to get in touch with the after
-
sales service specified by the retailer of the product.
Diaplity of apecific meaatge
FR
EN
Timer aetting
The timer is activated by pressing the "Timer selection" button. The timer light comes on and the message "ti"
is displayed for 3 seconds.
The desired cooking time is selected by pressing the (+) and (
-
) TIMER buttons. The timer duration is between 1
and 99 timer.
An audible signal informs the user when the timer is over.
The end of the timer forces the power to stop.
To stop the audible BEEP emitted at the end of the timer, a short press on one of the buttons is sufficient.
Pressing the "Timer selection" button again allows you to return to level adjustment mode. The timer indicator
goes out and the message "te" is displayed for 3 seconds.
