95
setups are saved along with the display plot whether a cable is attached or not.
To recall and use this particular setup on the TDR press “Memory” and
►
key at
“Recall.” Use
▲▼
arrows to highlight the saved trace (setup) by name and press
ENTER to recall. When the display recalls the trace all the saved setups used to
save that trace will also be recalled. Press ESC to exit the “Recalled Trace”
screen and return to the “Measurement” screen with the recalled setups.
Cables Tab
The “Cables Tab” permits uploading or downloading Cable Lists from the TDR,
creating custom Cable Lists and saving them in a folder on the PC. Figure 5-11
shows the Cables Tab.
Figure 5-11
Read List from TDR – Uploads the Cable List stored in the TDR’s Cable List
memory.
NOTE: When modifying cable lists it is recommended to re-save the modified list
under a separate name from the original lists supplied with ETDR PC Vision. This
will preserve the original cables lists for future reference.
Write List to TDR – Downloads the Cable List displayed in this tab to the TDR’s
Cable List memory.
Read Cable List File – Opens a Windows standard “Open File” sub-window to
load a saved Cable List file (.cbl extension) to the tab.