80
original cable’s data and re-edit that cable. It can also be restored using ETDR
PC Vision software. Refer to Section 5 for those instructions.
Use the
▲▼
keys to scroll up or down one cable at a time or the
◄►
keys to
scroll up or down one page at a time to reach the cable to be modified or and
open slot. Press the
Bcksp
key to enter the Edit screens. The Edit screens
will be presented in the following order:
ENTER Z0
ENTER VF
ENTER DESCRIPTION
Figure 4-8 is the ENTER Z0 screen.
Figure 4-8
Use the alpha-numeric keypad to change the impedance value and press
to accept and move to the ENTER VELOCITY FACTOR screen shown
in figure 4-9.
Figure 4-9