25
MRI PC Vision
™
Abstract
MRI PC Vision
™ is the companion windows application for your Bravo MRI 3000 Analyzer. Besides
allowing for remote operation of your MRI-3000, it also contains tools and utilities to help you get the
most out of your instrument.
Installing MRI PC Vision
MRI PC Vision
™ will support Microsoft Windows 7 and higher, and communicates to your instrument
via a USB connection. A direct connection to your PC is recommended; the qualities of certain USB
Extension Hubs have been known to cause communications issues with the unit.
To install, simply run the installation package (SETUP.EXE), and follow the installation prompts. The
default location for your user files is:
\Users\<username>\My Documents\ AEATechnology\MRI-Vision
All of your pertinent user data, downloads, traces, etc. will be stored there.
Running MRI PC Vision
Start the MRI PC Vision Application by either clicking on the icon on your desktop, or by selecting it
from the start menu.
When the MRI PC Vision application is started, it will detect the instrument if it is powered ON, and
connected to a USB port. If the MRI-3000 is not plugged in when the MRI PC Vision application is
started, the application will sense your unit when you attach it with a USB cable to any USB port on
your PC. The following dialog box will be displayed when the connection is being initialized:
The MRI PC Vision application will signal to you that it has successfully detected and attached your
instrument by indicating the instruments' model number (marked 'Unit'), and changing the status light
from red to green, as shown in the screen shot below:
If the MRI-3000 remains disconnected, you will still be able to load and view previously stored data
traces.
