U
PS IST7
Series (60K-200K)
User Manual
2 Overview
25
Table2-9
Illustration of indicator of the SNMP card
Green indicator (R)
Red indicator (E)
Status description
ON
ON
Start
Flicker
*
Running
OFF/ON
*
Crash, keep final status
*
OFF
NO alarm
*
Flicker
Alarm
*
means the indicator is in any status.
SNMP card software
It is suitable but not only for the following browsers(the early operating system may not be good in
compatibility): C browser, IE11+ browser. The login interface is different in different browser,
using the screen resolution of computer better than 1600*900.
Please ensure that the setting IP address is in the same network segment with user's computer IP address.
After finishing the SNMP installation and wring, please configure the software in the following order.
Step 1
Open browser, and enter the IP address of the WiseWay built-in card (KC502S)(default IP is
192.168.0.100).
When the IP address of the SNMP built-in card(KC502S) is changed or multiple SNMP cards are used
at the same time, the corresponding IP address can be obtained through WiseFind software(enter the
address in PC to download the WiseFind software and then install it).
Step 2
Enter the user name and password in the login page and click
Login
to enter the monitoring page.
Summary of Contents for IST7 Series
Page 1: ...UPS IST7 60 200kVA Series User Manual www aecups com ...
Page 2: ......