3 Installation
UPS IST7 Series (60K-200K)
User Manual
54
Figure3-17
Bottom installation size (bottom view of pedestal)
The recommended bolts is M12, corresponding drilling depth is 75mm, which can be adjusted
according to the actual installation situation.
If channel steel is used for installation, drill four installation holes
φ
14mm on the channel steel
directly according to the drilling size shown in Figure3-18, and then install it directly according to
Figure3-18
Recommended installation size for channel steel (unit: mm)
Step 3
Install the expansion bolts, as shown in Figure3-19.
Summary of Contents for IST7 Series
Page 1: ...UPS IST7 60 200kVA Series User Manual www aecups com ...
Page 2: ......