6 Package, Transportation and Storage
69
6 Package, Transportation and Storage
6.1 Package
During packing, please pay attention to the place direction requirements. At the side of the
package, there is afraid of wet, handle with care, upward, stack layer limit, etc. alarm marks.
And also, the device model is printed on the package. At front of the package, the device
name is printed.
6.2 Transportation
During transporting, pay attention to the warning marks and avoid severe impact on the
package. Place the device according to the marked direction, which is to avoid damage the
component. Any inflammable, explosive, corrosive object is not allowed to shipping with the
device. While midway transportation, do not put the device in the open air. The device cannot
suffer any rain, snow or liquid material or mechanical damage.
6.3 Storage
During storing, place the UPS according to the marked direction. The package box should be
far away from ground for 200mm, and keep at least 500mm from wall, eat source, cold
source, window or air inlet.
Storage temperature: 0~40
℃
, relative humidity is 20%
~
80%.In the warehouse, any
inflammable, explosive, corrosive object or harmful gas is not allowed, and also, strong
mechanical shake, impact or magnetic field is forbidden. The storage period of these
requirements, generally, is 6 months. If the UPS is stored more than 6 months, it is
necessary to check again. If the UPS is stored for a long time, please charge the battery
every 3 months.
Summary of Contents for IST9
