16
aee.com
DE
EN
ES
PT
IT
EL
FR
NL
PL
CS
HU
SV
FI
NO
RU
DA
Accessory Application
Water-proof Housing and Moisture-proof Foam
In order to avoid and reduce the dewing on the glass of the water-proof house, we suggest
inputting the moistureproof cotton inside the water-proof case in big temperature range
environment.
Follow these steps to load video camera into water-proof housing:
Moisture-proof foam
Follow these steps to assemble the waterproof housing rear case:
Precautions for the Waterproof Housing:
The waterproof housing is a precision component. When using the waterproof housing,
adhere to the following precautions:
1. Do not randomly remove or change the O-ring, key, and lens cover. Otherwise, the
waterproof performance deteriorates.
2. Do not put the waterproof housing in a place where corrosive gases are easily generated
due to strong acid or alkali. Do not make the waterproof housing in contact with
chemical or corrosive objects, such as strong acid or alkali.
3. Do not put the waterproof housing in a place where temperature is high (50°C) or low
(-10°C) for a long time to avoid deformation.
4. Do not expose the video camera to sunshine for a long time to avoid deterioration of the
waterproof performance.
5. Before use, ensure that the O-ring is intact, the seal is litter-free, the housing is fully
sealed, and the buckle is tight.
6. After using the housing in sea water, wash it using fresh water, clean it, and dry it in a
cool place.
