AEG 0036502, Original Instructions Manual

21

21

BATTERY AND CHARGER

Compatible battery pack  

(not included)

Compatible charger  

(not included)

L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B

L1860R-X5

L1890R

AL18G

AL1218G

BL1218

BLK1218

BL18DP-X5

BL18DP2-X5

Use AEG 18V battery and charger only

WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. 

Save all 

warnings and instructions for future reference.

ANGLE GRINDER SAFETY WARNINGS

Safety Warnings Common for Grinding, Wire Brushing or 

Abrasive Cutting-Off Operations:
a)  This power tool is intended to function as a grinder, 

wire brush or cut-off tool. Read all safety warnings, 

instructions, illustrations and specifications provided 

with this power tool. 

Failure to follow all instructions listed 

below may result in electric shock, fire and/or serious injury.

b)  Operations such as sanding or polishing are not 

recommended to be performed with this power tool. 

Operations for which the power tool was not designed may 

create a hazard and cause personal injury.

c)  Do not use accessories which are not specifically 

designed and recommended by the tool manufacturer.

Just because the accessory can be attached to your power 

TECHNICAL DATA

CORDLESS ANGLE GRINDER

BEWS18BLX230

Rated voltage  

 18V 

Rated speed  

 5500 min

-1

Thickness of grinding wheel  

 6 mm

Grinding wheel diameter  

 230 mm

Thread of work spindle  

 M 14

Accessory type

Grinding wheel  

 Type 27

Cutting wheel  

 Type 41 or Type 1 (Flat disc)

Wire brush  

 Type 6

Weight - not including battery pack  

 4.8 kg

Weight according EPTA-Procedure 01/2003 (Li-Ion 1 x 1,5Ah)  

 5.2 kg

Weight according EPTA-Procedure 01/2003 (Li-Ion 2 x 9,0Ah)  

 7.1 kg

Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
A-weighted sound pressure level  

L

p

 = 86 dB(A)

Uncertainty K  

 3 dB(A)

A-weighted sound power level  

L

W

 = 97 dB(A)

Uncertainty K  

 3 dB(A)

Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value 
Surface grinding (Li-Ion 1 x 1,5Ah…2 x 9,0Ah): Vibration emission value  

a

h,AG

 = 7.0 m/s

2

Uncertainty K  

 1.5 m/s

2

Disk sanding (Li-Ion 1 x 1,5Ah…2 x 9,0Ah): Vibration emission value  

a

h,DS

 ≤ 2.5  m/s

2

Uncertainty K  

 1.5 m/s

2

For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in 

EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The 

declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, 

with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure 

level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it 

is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. 
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the 

accessories, keep the hands warm, organisation of work patterns.