AEG 210621236-11052010, User Manual

Problem

Possible cause

Solution

Water flows on the

ground.

The melting water outlet does

not flow in the evaporative tray

above the compressor.

Attach the melting water outlet

to the evaporative tray.

There is too much frost

and ice.

Products are not wrapped prop

-

erly.

Wrap the products better.

The door is not closed correctly. Refer to "Closing the door".

The Temperature regulator may

be set incorrectly.

Set a higher temperature.

The temperature in the

appliance is too high.

The door is not closed correctly. Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de

-

crease to room temperature be

-

fore storage.

Many products are stored at

the same time.

Store less products at the same

time.

The temperature in the

refrigeration is too high.

There is no cold air circulation

in the appliance.

Make sure that there is cold air

circulation in the appliance.

The temperature in the

freezer is too high.

Products are too near to each

other.

Store products so that there is

cold air circulation.

The appliance does not

operate.

The appliance is switched off.

Switch on the appliance.

The mains plug is not connec

-

ted to the mains socket correct

-

ly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap

-

pliance to the mains socket. Con

-

tact a qualified electrician.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

1. Disconnect the appliance.

2. Push the movable part to unhook the

lamp cover (1).

3. Remove the lamp cover (2).

4. Replace the lamp with one of the same

power and specifically designed for do

-

mestic appliances only.

5. Install the lamp cover.

6. Connect the appliance.

7. Open the door. Make sure that the lamp comes on.

1

2

14

What to do if…