32
Warning
●
Failure to observe the instructions on cleaning the unit
and changing the filters will cause a fire hazard. You are
therefore strongly recommended to follow these
instructions.
Changing the light bulb
●
Disconnect the unit from the mains power supply.
●
Remove the grid.
●
Replace the old light bulb with a new light bulb (40 W
max.).
●
If the light does not come on, make sure the bulb has
been screwed in correctly before contacting the technical
assistance service.
Cleaning
●
Warning: always disconnect the hood from the mains
power supply before cleaning it.
Never insert pointed objects in the motor’s protective
grid.
●
Wash the outside surfaces using a delicate detergent
solution. Never use caustic detergents or abrasive brushes
or powders.
●
Only ever clean the switch panel and filter grille using a
damp cloth and delicate detergents.
●
It is extremely important to clean the unit and change the
filters at the recommended intervals. Failure to do so will
cause grease deposits to build up that could constitute a
fire hazard.
