AEG 335 D, Operating And Installation Instructions

42

Metal grease filter

• The purpose of the grease filters is to aspirate grease particles which

form during cooking and it must always be used, either in the
external evacuation or internal recycling function.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.

Open the metal grease filter

• Model CHDE 6260:To remove the grease filters, first pull the handles

upwards, then extract the filter outwards. Fig. 2a.

• Model 335 D:To remove the grease filters, first remove the grid (see

Fig. 2a) and take out the grease filters oushing on the locking
springs Z. Fig. 2b.

Hand washing

Soak grease filters for about one hour in hot water with a grease-
loosening cleaner, then rinse off thoroughly with hot water. Repeat
the process if necessary. Refit the grease filters when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select most powerful washing
programme and highest temperature, at least 65°C. Repeat the
process. Refit the grease filters when they are dry.
When washing the metal grease filter in the dishwasher a slight
discolouration of the filter can occur, this does not have any impact
on its performance.

• Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Fig. 2a

Fig. 2b

Z