15
UsING yoUr oVEN (coNtINUED)
setting the delayed start cooking time
the “cook time” and “stop time” functions can be
combined to switch the oven on and off at a specific
time during the day .
1 . select the desired oven function and
cooking temperature .
2 . press timer symbol as often as necessary, until the
“cook time”
❘➔❘
symbol appears .
3. Set the desired cooking time by using – or + , whilst
the “timer arrow” is flashing .
4 . press timer symbol as often as necessary, until the
“end time”
➔❘
symbol appears flashing
5. Set the desired switch-off time using the – or +
whilst the “timer arrow” is flashing . the “cook
time”
❘➔❘
and “end time”
➔❘
arrows are lit to confirm
that the oven has been programmed .
on completion of cooking
when the set time has elapsed, a signal will sound for 1
minute, the oven will switch off and the remaining time
indication “0 .00” will appear on the display .
1. To stop the signal, press “+” or “–”.
setting the minute minder
for setting a countdown period . when the period of
time has elapsed, an audible signal is sounded .
NOTE: This feature has no effect on the oven
operation.
1 . press timer symbol as often as necessary, until
the “minute minder” symbol appears flashing .
Set the desired length of time using – or + whilst
the “timer arrow” is flashing . after 5 seconds
from the last time adjustment the “timer arrow”
will disappear and the minute minder has been set .
Once the set time has elapsed, a signal will sound
for 1 minute . the time indication “0 .00” and a
flashing “minute minder” symbol will appear on
the display .
2. To stop the signal, press “+” or “–”.
Using fHU (fast Heat Up) mode
to quickly and efficiently preheat your oven, it is
recommended to select the “fast heat”
cooking feature .
1 . Ensure the appliance is on by pressing the . the
oven lights will light .
2 . select the desired oven function by pressing .
3. Set the cooking temperature by pressing the – or +
to decrease or increase the temperature .
NOTE: The temperature can only be adjusted when
the degrees symbol “°” is flashing.
the temperature setting changes in increments of 5°c .
4 . press the symbol . the letters “fhu” will appear
on the temperature display .
5 . when the set temperature is reached the buzzer
will sound and the set temperature will be displayed .
NOTE: “FHU” cannot be selected if the oven
temperature is above the preset temperature.
Activating the child-proof lock
when the child lock is engaged, the oven cannot be
switched on .
1 . switch off the appliance using the .
2 . press and – at the same time, hold until
the word “safE” is displayed .
the child-proof lock is now engaged .
NOTE: When the child-proof lock function is active the
time of day and minute minder can only be set.
releasing the child-proof lock
1 . press and – at the same time, hold until the word
“safE” is cleared from the display . the child-proof
lock is now released and the oven is ready to use .
Beep on touch
the beep sound can be activated anytime when a
symbol is pressed .
1 . Ensure the oven is off by pressing .
2 . press and + simultaneously for 2 seconds,
a single beep will sound to confirm the operation .
repeat the above procedure to reset the beep on
touch mode . as default, the beep on touch
mode is off .
safety cut-out feature
the oven automatically switches itself off if the
temperature is not adjusted or the appliance is left
operating after a period of time . the oven switches
itself off after:
• 20 hours when set between 30°C and 120°C
• 8.5 hours when set between 120°C and 200°C
• 5.5 hours when set between 200°C and 250°C
Demonstration Mode – programmable controller
models
for display purposes, the appliance has a
demonstration mode to enable demonstration of
oven functionality without consuming power . In
demonstration mode, the display, the light and the fan
only are operational .
when the appliance is in demonstration mode and the
display is switched on, the clock symbol will be on .
If the appliance is in demonstration mode, to operate
the appliance normally the demonstration mode will
need to be deactivated .
to deactivate demonstration mode
1 . press symbol until the display returns to stand by
mode .
2 . press simultaneously the timer symbol and “-“ for
5 seconds .
