AEG 5000 Series, User Manual

Problem

Possible cause

Solution

There is no voltage in the
mains socket.

Connect a different electrical
appliance to the mains sock-
et. Contact a qualified elec-
trician.

The appliance is noisy.

The appliance is not suppor-
ted properly.

Check if the appliance
stands stable.

Acoustic or visual alarm is
on.

The cabinet has been re-
cently switched on.

Refer to "Door Open Alarm"
or "High Temperature
Alarm".

The temperature in the ap-
pliance is too high.

Refer to "Door Open Alarm"
or "High Temperature
Alarm".

The door is left open.

Close the door.

The compressor operates
continually.

Temperature is set incorrect-
ly.

Refer to "Control Panel"
chapter.

Many food products were
put in at the same time.

Wait a few hours and then
check the temperature
again.

The room temperature is too
high.

Refer to "Installation" chap-
ter.

Food products placed in the
appliance were too warm.

Allow food products to cool
to room temperature before
storing.

The door is not closed cor-
rectly.

Refer to "Closing the door"
section.

The Frostmatic function is
switched on.

Refer to "Frostmatic func-
tion" section.

The compressor does not
start immediately after
pressing the "Frostmatic",
or after changing the tem-
perature.

The compressor starts after a
period of time.

This is normal, no error has
occurred.

Door is misaligned or inter-
feres with ventilation grill.

The appliance is not level-
led.

Refer to installation instruc-
tions.

Door does not open easily.

You attempted to re-open
the door immediately after
closing.

Wait a few seconds between
closing and re-opening of
the door.

There is too much frost and
ice.

The door is not closed cor-
rectly.

Refer to "Closing the door"
section.

www.aeg.com

14